How To Unscrew The Screw

Table of contents:

How To Unscrew The Screw
How To Unscrew The Screw

Video: How To Unscrew The Screw

Video: How to remove stripped screws – 7 different ways 2022, December

Often, during the operation of threaded fasteners, an unpleasant thing becomes clear - they do not unscrew. The reason for this may be rust, a violation of the temperature regime, which led to sticking, thread stripping, etc.

How to unscrew the screw
How to unscrew the screw

It is necessary

  • - metal brush;
  • - aerosol WD 40, kerosene, turpentine, rust cleaner or brake fluid;
  • - slotted or Phillips screwdriver;
  • - impact screwdriver;
  • - a hammer;
  • - file or file;
  • - a drill with a set of drills, a tap;
  • - special tool Alden 4507P;
  • - goggles, gloves.


Step 1

Do not attempt to loosen a rusty countersunk screw or bolt without first working. So you can just rip off the thread, but with such an intention how to unscrew a screw or how to unscrew a bolt, you cannot cope. Remove rust from the threaded connection with a metal brush. Next, spray them with WD 40 spray, turpentine, kerosene, rust cleaner or brake fluid.

Step 2

For a better effect of these substances, you can abundantly moisten a cloth with them and leave it on the fasteners for 5-10 minutes. If not successful, reapply WD 40 highly penetrating grease to the threaded joint. Then easily unscrew the problematic countersunk screw or other threaded connection element.

Step 3

Try to swing it from side to side when loosening a naughty countersunk screw or bolt. This will make it easier for the lubricant to penetrate deep into the threaded joint. Therefore, your attempt to complete a task such as unscrewing a screw or how to unscrew a bolt will be successful.

Countersunk screws
Countersunk screws

Step 4

If the flat head screw is stuck on too much, use an appropriate slotted or Phillips screwdriver and try to remove it by gently hitting the screwdriver handle with a hammer. An impact screwdriver can be used. Insert it into the slot and hit hard with a hammer on the head of the screwdriver. The screwdriver mechanism will work and turn the screw. True, this screwdriver is not cheap.

Step 5

Try to warm up a stubborn threaded joint using a soldering iron, boiling water, etc. At high temperatures, scale and rust are destroyed, preventing the unscrewing of fasteners. Just try to unscrew the parts of the threaded connection immediately, otherwise they will warp, which will complicate the further unscrewing process.

Step 6

If the parts of the threaded connection have become unusable as a result of external aggressive influences or were initially of poor quality, try to remove them as follows. Weld a lever or nut to the protruding parts of a screw, bolt or stud and try to loosen them using one of the methods listed above.

Lever use
Lever use

Step 7

Drill out very carefully without damaging the threads, damaged parts. First, file or file with a file for more accurate punching. Next, use a smaller drill to drill the hole. Tap a new thread, insert the bolt, and remove the remaining fastener.

Step 8

Make your life easier with the Alden 4507P dedicated tool, which is designed to solve problems such as unscrewing a screw, stud, screw or how to unscrew a bolt. This set consists of 4 extractors of different sizes - these are double-sided bits with a drill and a tapered tap in opposite ends. Insert the selected extractor into the drill, drill a blind hole.

Alden 4507P Screw Loosening Set
Alden 4507P Screw Loosening Set

Step 9

Next, use the other part of the extractor - the tap. To remove the right-hand screw, set the drill to the left-hand rotation. At low speeds, deepen the screw tap into the resulting hole. The left-hand thread of the tap will create a force to loosen the stripped bolt.

Popular by topic