How To Make A Walk-behind Tractor With Your Own Hands

Table of contents:

How To Make A Walk-behind Tractor With Your Own Hands
How To Make A Walk-behind Tractor With Your Own Hands
Video: How To Make A Walk-behind Tractor With Your Own Hands
Video: Reversible plough for a walk-behind tractor. 2023, February
Anonim

Agricultural work on a large household plot requires at least minimal mechanization. If you are tired of leaning on a shovel for hours, harvesting potatoes, it may make sense to make a walk-behind tractor with your own hands. Such a device can be a good help for a gardener and an amateur gardener.

How to make a walk-behind tractor with your own hands
How to make a walk-behind tractor with your own hands

Necessary

  • - steel corners;
  • - cutting metal pipes;
  • - motorcycle engine;
  • - nodes from agricultural machinery;
  • - wheels;
  • - fasteners;
  • - welding machine;
  • - a set of locksmith tools;
  • - dye.

Instructions

Step 1

Make a diagram of the walk-behind tractor, providing for the main components in its design: chassis, engine, transmission, working body and controls. For homemade homemade products, the engine from the Voskhod motorcycle is quite suitable. The base of the walk-behind tractor will be a metal frame, which can be assembled from metal pipes, corners and steel strips, fastening the elements with bolts or by welding.

Step 2

Develop a kinematic diagram of the walk-behind tractor. It may include a countershaft fitted with two sprockets from the same motorcycle. For a larger walk-behind tractor, you may need chain stages from agricultural machines that have worked out their life.

Step 3

Pick up wheels for the walk-behind tractor. It is best to use wheels from agricultural machines, equipped with deep tread and dustproof bearings. For work on difficult terrain, you may need replacement wheels in the form of metal rims with hooks that can cling to hard surfaces. It is best if both wheels are driving.

Step 4

Weld your farm machine frame. Use for pipe trimming base and steel angle. In the front part, weld the struts on which the engine will be mounted. At the rear of the frame, install a swivel mechanism for attaching attachments.

Step 5

Give the handles of the walk-behind tractor to an elongated shape so that it is convenient to hold the device with your hands without bending over. A more complex design can also be envisaged, when the handles have the ability to change their position and the angle of extension. Equip the handles with clutch and throttle grips. Most likely, the standard motorcycle cables leading to the handles will need to be lengthened.

Step 6

Put the whole structure together. When installing individual units, be careful to ensure that they are securely attached to the frame. Remember to fit the wheels with guards to protect the operator from dirt. Paint the finished walk-behind tractor in a practical and non-marking color - this will protect the unit from corrosion. Your mechanical assistant is now fully operational.

Popular by topic