Riding bmx has been popular for quite a long time, because it is a good way to spend your free time not only with pleasure, but also with benefit. However, the purchase of this vehicle can be expensive, so sometimes it's better to build bmx yourself.
Instructions
Step 1
First, prepare the most necessary parts - brakes and wheels. To mount the wheel on the front fork of the bicycle, you need to release the cable from the brake frame. Then unscrew the nuts and insert the wheel into place. Now you can reattach all wheel nuts. After that, inserting the brake cable through the slot of the frame, install the brake pads.
Step 2
Once the first step is completed, you need to start installing the stem on the future bmx. To do this, you need to unscrew the tension bolt and insert the stem into the steering column. Please note that it must be parallel to the front wheel. Now tighten the nut and you can begin installing the saddle on the frame.
Step 3
Insert the saddle into the special hole in the frame, fix it at the desired height, and then tighten the fixing bolt.
Step 4
Before installing the pedals on the bike, check the markings (which is left and which is right). In accordance with it, insert each of the pedals into the connecting rod and turn it all the way. By the way, the left one should be turned counterclockwise, and the right one - clockwise.
Step 5
Now start installing the rear wheel: it must be fixed strictly between the frame and the rear fork. Check the eccentric and tighten all the necessary nuts with a wrench. The installation of the brake pads will be the same as described in the first step.
Step 6
After assembling the bike, check the strength of all mountings, try to tighten the nuts as tight as possible to ensure the durability of your bike and your safety.
